THREE AVAILABLE FLUX COLLECTION SYSTEMS

Basic Air Oven Flux Collection System

The operating goal of the basic air oven flux collection system is to collect a significant amount of the flux; permitting a minimum amount of flux vapor from escaping into the customer’s plant exhaust system. Remaining cooled and dilute flux vapor passing through the cooling modules is ducted directly into the customer’s plant exhaust system. The remaining flux exhaust vapor is then mixed with the clean waste cooling air in a single exhaust. This system is typically configured with either one (1) or three (3) flux vapor extraction locations within the oven. Total exhaust flow from the combined exhaust port is approximately 350 cfm maximum.

I.C.T is a manufacturer of SMT machines. It mainly provides customers with SMT production lines including SMT Stencil Printers,  Pick and place machines, Reflow Oven, AOI Machine, Wave Soldering Machine and PCB Handling Machine etc. I.C.T has more than 25 researches on SMT and DIP technology,  for the world Customers provide SMT total solutions. There are successful cases of SMT technICal team in Asia, Europe, AmerICa, AfrICa, and Australia.

I.C.T provide SMT solutions at various stages according to the different needs of customers. I.C.T is not only a provider of SMT equipment and technology, but also is the customer's escort in the field of SMT and DIP.

Welcome more people to discuss with us about SMT technologies and solutions, please contact us for more information:

Tel: +86 13670124230 (WhatsApp/Skype/WeChat)

Email: etaSMT@foxmail.com

Filtered Air Oven Flux Collection System

The operating goal of the filtered air oven collection system is to collect virtually 100 percent of the flux vapor extracted from the oven. Remaining cooled and diluted vapor passin through the cooling modules is ducted to a filter box which contains either a replaceable HEPA or and activated charcoal adsorption filter. The clean flux exhaust air is then mixed with the clean waste cooling air in a single exhaust. This system is typically configured with either

one (1) or three (3) flux vapor extraction locations within the oven.  Total exhaust flow from the combined exhaust port is approximately 350 cfm maximum.

The filter box access cover is also equipped with a safety interlock switch, like the cooling modules, to prevent an operator or technician from having flux vapors blow into their face while inspecting or replacing filters.

SMD Production Line, SMT Line Equipment,  PCB Stencil Printer,Semi Auto Stencil Printer, Reflow Machine, PCB Oven, Wave Soldering Desktop Machine, Patch Placement Machine And Heat Seal, High Speed Smart Placement Machine, SMT Coating Machine For PCB, SMT Coating Machine For PCB LED, Coating Spraying Gluing Machine For PCB LED, PCB Board Cutting And Marking Machine, PCB Off-Cut Remover Machine, PCB Reject Conveyor, PCB Router Drill Bits Set With Shank 3.175MM, Solder Soldering Robot, Soldering Robot Welding Soldering, Two Heads Double Solder Soldering Robot